Open-Source Security Intelligence

Know every vulnerability
before it knows you.

DevGuard continuously monitors your dependencies and alerts you when CVEs like this one affect your stack — with real-time threat intelligence built for developers.

Search

GHSA-jj3q-cwqj-842r

HighCVSS 7.5 / 10
Published Oct 7, 2026·Last modified Oct 7, 2026
Affected Components(2)
NuGet logoImageSharp
3.0.0 – 3.2.0
NuGet logoImageSharp
4.0.0 – 4.1.1
Description

Summary

When decoding a fax-compressed strip TIFF (Compression=3 / Group 3 1D, or Compression=2 / Modified Huffman), the CCITT decompressors write decoded runs through BitWriterUtils.WriteBits/WriteBit/WriteZeroBit, which advance and write bits via Unsafe.Add with read-modify-write semantics — without ever comparing the write position against the target buffer length. The strip buffer is sized ImageWidth × RowsPerStrip (8 bytes in the PoC), but two independent defects let an attacker write tens of millions of bits past it: (a) T4 only increments rowsWritten when an EOL code is read, and one ReadNextRun accumulates unlimited makeup codes (+2560 px per 12-bit code) into a single RunLength that WritePixelRun then writes in one shot; (b) Modified Huffman writes before validating (pixelsWritten > Width is checked at :90-93, after the write at :56-63), so the overflow completes even though an exception is thrown later. One crafted ~90 KB file writes ~19.2 MB linearly past an 8-byte buffer and deterministically kills the process; the write offset and length are fully attacker-controlled (classic heap-corruption primitive on the managed heap).

Verified at commit 5cd4d0d26a82a9549f297a237aea9cf665bddff8 (main; latest release v4.1.0, the supported major). A related tiled-path variant (tile-buffer width mismatch) was reported separately as GHSA-v76p-62qx-wwq2 — this report covers the distinct strip-path root cause.

Details

Root cause: the bit-writing sink has no bounds check, and neither decompressor constrains run lengths against the strip buffer.

Attack surface: Image.Load(stream) on an attacker-supplied strip TIFF (TiffDecoderCore.DecodeStripsChunky → TiffDecompressorsFactory.Create → Decompress). Default configuration, no authentication, no user interaction — a plain strip TIFF (far more common than the tiled variant) with Compression=2 or 3 and a chain of CCITT makeup codes.

Relationship to GHSA-v76p-62qx-wwq2: that report is the tiled variant — a caller-side width mismatch (TiffDecompressorsFactory drops tile parameters) that overflows with perfectly legal run codes. This report is the strip variant — the callee-side missing bounds check plus T4's EOL-only row accounting and MH's write-before-validate. Fixing the caller mismatch does not address this vector; bounding BitWriterUtils addresses both (see remediation).

Suggested remediation:

  1. Bound BitWriterUtils.WriteBits/WriteBit/WriteZeroBit against buffer.Length*8 (return bool / throw ImageFormatException) — do not rely on caller discipline.
  2. In the T4/MH decompress loops, validate (bitsWritten + RunLength) <= buffer.Length*8 before writing; abort T4 when accumulated rows exceed stripHeight instead of waiting for the loop to end naturally.
  3. In Modified Huffman, move the pixelsWritten > Width check before the actual write.
  4. Regression fuzz cases: Compression=2/3, EOL-less oversized makeup chains, edge widths; strip and tiled paths share the same constraint.

PoC

Full PoC posted as the first comment below: Program.cs (driver), poc-tiff-t4.tif + poc-tiff-mh.tif (crafted files, ~90 KB each, base64 inline), README.

  1. Build a console project referencing src/ImageSharp/ImageSharp.csproj, run it against either crafted file (or call Image.Load on it).

  2. PoC layout: TIFF (II, 42), ImageWidth=64, ImageLength=1, BitsPerSample=1, Photometric=WhiteIsZero, RowsPerStrip=1; strip data = EOL(12bit) + 60000× white makeup 2560 (000000011111) + white terminating code (000111) — declared run ≈ 153,600,001 px ≈ 19.2 MB into an 8-byte buffer.

  3. Observed (both variants):

    strip payload 90003 bytes, claimed run ~153,600,001 px = 19,200,000 bytes into 8-byte buffer
    Fatal error. System.AccessViolationException: Attempted to read or write protected memory.
       at SixLabors.ImageSharp.Formats.Tiff.Compression.BitWriterUtils.WriteBits(Span`1<Byte>, IntPtr, IntPtr, Byte)
       at ...ModifiedHuffmanTiffCompression.Decompress(...)
       at SixLabors.ImageSharp.Formats.Tiff.TiffDecoderCore.DecodeStripsChunky[Rgba32](...)
    Aborted (core dumped); exit=134
    

    The T4 variant crashes identically at T4TiffCompression.WritePixelRun → BitWriterUtils.WriteBits.

  4. Control: an equivalent file without the makeup chain (legal EOL-delimited rows) decodes normally — the crash comes from the oversized runs, not the container.

Impact

  • What it is: out-of-bounds write (CWE-787). For any service decoding untrusted TIFFs (image hosting/transcoding/thumbnails/CMS): reliable remote DoS (uncatchable fatal process crash), plus a heap OOB write with attacker-controlled offset and length — a realistic heap-corruption / potential code-execution surface. In scope of your SECURITY.md as a library vulnerability.
  • Who is impacted: applications decoding untrusted TIFF with SixLabors.ImageSharp at the current major (verified on main past v4.1.0); plain strip TIFFs with Compression=2/3 are the trigger, which ordinary TIFF writers can produce.


Reported by Kimi Security Team (bug-report@moonshot.ai).

Upload your SBOM

Upload your own SBOM in CycloneDX 1.6 or higher (JSON) directly here to check your vulnerabilities.

Risk Scores
Base Score
7.5

The vulnerability can be exploited over the network without needing physical access. It is easy for an attacker to exploit this vulnerability. An attacker does not need any special privileges or access rights. No user interaction is needed for the attacker to exploit this vulnerability. The impact is confined to the system where the vulnerability exists. There is a high impact on the availability of the system.

Threat Intelligence
6.9

Exploitation attempts have been detected. Elevated vigilance and prompt remediation are advised.

EPSS
0.39%

The exploit probability is very low. The vulnerability is unlikely to be exploited in the next 30 days.

Exploit
Not available

We did not find any exploit available. Neither in GitHub repositories nor in the Exploit-Database.

Browse More

Scan your project

Continuously monitor your dependencies and get alerted when vulnerabilities like this one affect your stack.

Checkout DevGuard